NAS and Synology Data Recovery for Local Businesses
Short answer
A crashed Synology or QNAP volume should not be repaired in the web interface — that can finish the damage. Power down, keep the drives in order, and bring the whole unit. $50 same-day evaluation, fixed quote before recovery.
When a Synology, QNAP, Buffalo, Drobo, or small office NAS will not mount, the wrong rebuild can destroy the remaining data. We preserve drive order, image each disk, and reconstruct the array virtually before extracting files.
- Synology SHR, SHR-2, RAID 0/1/5/6/10 and JBOD
- QNAP, Buffalo, Drobo, Dell and HP small servers
- Failed rebuilds and multi-drive failures
- BTRFS, EXT, NTFS, VM and database files
- $50 same-day evaluation with written scope
- Emergency business recovery coordination
Power down before rebuilding
If a NAS says degraded, crashed, rebuilding, or volume not mounted, stop. Label every drive bay position and power the unit down. Reinserted drives, forced rebuilds, and firmware resets are the most common ways recoverable NAS cases become unrecoverable.
How we recover NAS data
Each drive is imaged sector-by-sector to fresh media. We determine RAID level, drive order, stripe size, parity rotation and file-system layout, then rebuild the array virtually so the originals remain untouched.
Business handoff after recovery
After data is recovered, we can hand off to Atascocita IT for backup redesign, NAS replacement, Microsoft 365 migration, or managed monitoring so the next disk failure does not become a production outage.
What 'degraded', 'volume crashed' and storage pool warnings actually mean
Synology DSM and QNAP QTS use alarming language, but none of these messages means the data is already gone. Degraded: one member disk has failed or dropped out of the array. Redundancy is reduced or gone, but the volume is usually still readable. This is the moment to stop — the next disk error can take the volume down. Volume crashed / not mounted: the system can no longer assemble the volume from its members. Causes range from a second disk failure to corrupt RAID metadata after a power cut. The files are typically still on the disks; the map to them is what broke. Storage pool warnings: alerts about disk health, bad sectors or a pool running out of redundancy. Treat them as an early warning, not background noise.
Why you should not click Repair or re-initialize
Storage Manager's Repair button starts a rebuild: the NAS reads every remaining disk at full stress and writes parity across the array. If another disk is weak — common when the disks are the same age — the rebuild itself can kill it, and a failed rebuild often leaves the volume worse than before. Re-initializing or creating a new storage pool is more destructive still: it writes fresh RAID and file-system metadata over the old layout, overwriting the very information needed to reconstruct the array virtually. The same caution applies to expanding the pool, changing RAID type, or letting the NAS 'migrate' disks. When the data matters, the safe move is to power down and image every disk first.
What to bring: drives, enclosure and DSM details
Bring every drive from the array, even the ones the NAS reported as failed — partial data from a 'dead' disk is often what completes the reconstruction. Label each drive with its bay number before removal; drive order is essential and easy to lose. Bring the enclosure itself if you can, along with its power supply. Note down anything you know about the setup: the RAID level or SHR mode, the DSM version, whether shared folders were encrypted (and the encryption key or passphrase if so), and which shares matter most. An admin login helps but is not required — we work from disk images, not the live system.
Not sure what to do next?
Check your symptoms before trying anything else, call us, or arrange pickup, drop-off or mail-in.
Related services & locations
Last updated · Reviewed by the Kingwood & Atascocita Data Recovery lab team · (281) 694-1425
Frequently Asked Questions
Can you recover Synology SHR or SHR-2?
Yes. We handle Synology SHR, SHR-2, BTRFS and EXT volumes, including cases where a rebuild failed or more than one disk has errors.
Should I replace a failed NAS drive and rebuild?
Not before the data is protected. A rebuild stresses every remaining disk and can destroy the array if another drive is weak.
Do you recover virtual machines from NAS devices?
Yes. We recover VMDK, VHDX, Hyper-V, VMware, database and file-share data from NAS and small server arrays.
How much is NAS recovery?
Evaluation is a flat $50, same day. RAID/NAS recovery is quoted after we inspect the drives, array layout and failure pattern.
DSM says my volume has crashed — is the data gone?
Usually not. 'Crashed' means the system cannot assemble the volume, not that the files are erased. The data typically remains on the member disks until a rebuild, repair or re-initialization overwrites it — which is why the next click matters.
Should I click Repair in Storage Manager?
Not before every disk is imaged. A rebuild reads all remaining disks at full load and writes across the array; if another disk is weak, the rebuild can fail halfway and destroy the redundancy that was protecting you.
Do you need the Synology enclosure, or just the drives?
The drives are the essential part — label them by bay and bring them all. The enclosure and power supply help us verify disk behavior and rule out a backplane or power fault, so bring the unit if you can.
Can you recover encrypted shared folders?
Yes, provided you have the encryption key or passphrase. Synology encrypts shared folders with a key you control; without it the recovered data stays ciphertext. Bring the key or the exported key file with the drives.